Data Realms Fan Forums
http://forums.datarealms.com/

SHIELD: Under Siege
http://forums.datarealms.com/viewtopic.php?f=24&t=31063
Page 3 of 10

Author:  Bad Boy [ Tue Jun 05, 2012 8:06 pm ]
Post subject:  Re: SHIELD: Under Siege

In the process of fixing up the City missions now, sorry for the delay folks.

Edit: Sorry, apparently I'm going to see MIB 3 later today so not sure if it'll be out at all today.

Author:  KnightD [ Tue Jun 05, 2012 8:50 pm ]
Post subject:  Re: SHIELD: Under Siege

I'm on OSX and I'm not able to run that .bat file. Any advice on what to do once I've dropped the Maps - Objects folder into my CC folder? Thanks!

Author:  weegee [ Tue Jun 05, 2012 9:12 pm ]
Post subject:  Re: SHIELD: Under Siege

Open Base.rte/Scenes.ini in plain-text editor and add this line to the end of file

Code:
IncludeFile = Maps - Objects/index.ini

Author:  riottrex [ Thu Jun 07, 2012 9:53 am ]
Post subject:  Re: SHIELD: Under Siege

Guys i have some problem with falling fps.
This error rapidly repeats in console.
Also i have B27.

Attachments:
Безымянный.jpg
Безымянный.jpg [ 158.69 KiB | Viewed 17098 times ]

Author:  eddevilish [ Fri Jun 08, 2012 12:35 pm ]
Post subject:  Re: SHIELD: Under Siege

Having played the Earth missions, I think they were pretty well done and I hope the B27 versions of the city missions come soon! :grin:
Although having to keep every character alive just made me play rather conservatively - I see it keeps the story consistent, but perhaps some more leeway would be nice.

Oh yes, that Doom secret - were you supposed to evacuate at least one guy to get it? Because I won one time with the finest hour spiel due to the ship getting destroyed and there was no secret, but when I got the finest hour again just now BAM I got the secret. A bug maybe?

Author:  weegee [ Fri Jun 08, 2012 1:48 pm ]
Post subject:  Re: SHIELD: Under Siege

eddevilish,

Author:  Bad Boy [ Sat Jun 09, 2012 8:12 am ]
Post subject:  Re: SHIELD: Under Siege

Yeah I'm sorry about the delay everyone, I've been busy (and also playing the metagame) so I haven't quite finished tenements, everything else is more or less done. I've just gotten home so hopefully I can finish it up today. I'm also waiting on a Unitec fix from gotcha because the new default bullets seem to make heads explode ridiculously easy, which makes it hard to tell if it's balanced. Keep in mind that all of the missions should still be playable, they'll just probably be way too hard and a lesson in frustration when an ak bullet randomly explodes your face.


Bump edit:
Updated, finally. Even with the slightly tougher heads version Gotcha gave me some heads are still flimsy as hell so some missions might be annoying until that's sorted out (Prison break, Shadow's head falls if you so much as look at it) but there's not too much I can do about that I'm afraid. Other than that I did what I could to balance it so normal difficulty isn't too hard but may still be a bit of a challenge. If it's too hard or too easy please let me know. Enjoy :)

Author:  Miggles [ Wed Jun 13, 2012 11:05 am ]
Post subject:  Re: SHIELD: Under Siege

I get unbelievable lag on every city map besides the first two. So much that it's unplayable, and it only happens on those Missions so it can't be my computer or anything. Might want to fix that :P

Author:  Bad Boy [ Wed Jun 13, 2012 5:59 pm ]
Post subject:  Re: SHIELD: Under Siege

Odd, I just played all of them (for a few minutes) and didn't get any problems whatsoever. I've also played all of them a lot more extensively while rebalancing for B27 and had no problems with them at all. Is anyone else suffering from this problem?
Miggles: Thanks for pointing this out to me, I hope I can solve it for you. Are you getting any errors printed in the console? Do you have the latest version of unitec and of the missions (my assumption is yes)? Do you get these slowdowns as soon as you start the mission?

Author:  Miggles [ Thu Jun 14, 2012 7:05 am ]
Post subject:  Re: SHIELD: Under Siege

Yes, yes, and yes. And yes.
I went to test and find the errors if any, but strangely enough the city missions stopped lagging awfully. Then I tried the Earth missions.
I got this screendump from Wastelands.

Author:  weegee [ Thu Jun 14, 2012 8:45 am ]
Post subject:  Re: SHIELD: Under Siege

Miggles, maybe you're using some mod with custom AI which is outdated? Wastelands don't use any CastMORays at all.

Fixed some UniTec split related errors though.

Author:  Gotcha! [ Thu Jun 14, 2012 11:57 am ]
Post subject:  Re: SHIELD: Under Siege

The latest unitec version should have those errors fixed as well. Are you using an older unitec?

Author:  Bad Boy [ Thu Jun 14, 2012 1:18 pm ]
Post subject:  Re: SHIELD: Under Siege

Yeah, no MO rays in any of my missions either, something you're using is outdated and it's probably unitec. You should try downloading the latest version just in case, maybe Gotcha slipped one by without you noticing :D

Or maybe it's another mod that's somehow calling it, unfortunately that error doesn't tell us what script it's in. If redownloading unitec doesn't fix it you could try putting everything needed for these missions in a clean install and see what happens, though I don't really think that'd help.

Author:  Pwnerizer [ Fri Jun 15, 2012 6:01 am ]
Post subject:  Re: SHIELD: Under Siege

wow great work! I especially like how you keep multiple friendly actors for co op play :D ! nice work yall

Author:  weegee [ Sat Jun 16, 2012 6:54 am ]
Post subject:  Re: SHIELD: Under Siege

Updated Earth to support fresh UniTec 1.1.0

Page 3 of 10 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/